Siemens LMV36.520A1 Basic Documentation page 225

Par. Parameter
no. LMV36...
Repetition limit value loss of flame
380 1 = no repetition
2 = 1 repetition
Fuel 1 oil: Point in time oil is ignited
381 0 = short preignition (Ph38)
1 = long preignition (with fan) (Ph22)
384 Fuel 1 oil: Postpurge time 3 (abortion if load controller ON)
385 Fuel 1 oil: gas pressure switch-min with «Lo Gp»
0 = inactive
1 = active
400 Ratio curves
401 Ratio control curves fuel actuator (curve setting only)
402 Ratio control curves air actuator (curve setting only)
403 Ratio control curves VSD (curve setting only)
404 Fuel 1: Ratio control curves fuel actuator (curve setting only)
405 Fuel 1: Ratio control curves air actuator (curve setting only)
406 Fuel 1: Ratio control curves VSD (curve setting only)
500 Ratio control
501 No-flame positions fuel actuator
Index 0 = home position
Index 1 = prepurge position
Index 2 = postpurge position
502 No-flame positions air actuator
Index 0 = home position
Index 1 = prepurge position
Index 2 = postpurge position
503 No-flame speeds VSD
Index 0 = no-load speed
Index 1 = prepurge speed
Index 2 = postpurge speed
Building Technologies Division
Infrastructure & Citiies Sector
Number of Type Edit
elements
1 Std_u8 Edit
1 Selection Edit
1 Time Edit
1 Selection Edit
13 Std_s16 Edit
13 Std_s16 Edit
13 Std_s16 Edit
13 Std_s16 Edit
13 Std_s16 Edit
13 Std_s16 Edit
3 Std_s16 Edit
3 Std_s16 Edit
3 Std_s16 Edit
Basic documentation LMV36...
29 Parameter list LMV36...
Value range Resolution
Min Max
1 2 1
0 1 1
1 s 108 min 0.2 s
0 1 1
0 ° 90 ° 0.1 °
0 ° 90 ° 0.1 °
15 % 100% 0.1%
0° 90° 0.1°
0° 90° 0.1°
15 % 100 % 0.1 %
0 ° 90 ° 0.1 °
0 ° 90 ° 0.1 °
0% 100% 0.1%
Default Password level
setting
1 OEM
0 SO
1 s SO
0 SO
0 °; 0 °; 15 °; undefined SO
0 °; 90 °; 45 °; undefined SO
0%; 100%; 50%; SO
undefined
0°, 0°, 15°, undefined SO
0°, 90°, 45°, undefined SO
0 %, 100 %, 50 %, SO
undefined
Index Value SO
0 0°
1 0°
2 15°
Index Value SO
0 0°
1 90°
2 45°
Index Value SO
0 0%
1 100%
2 50%
225/248
CC1P7544en
25.09.2013