Siemens LMV36.520A1 Basic Documentation page 69

Building Technologies Division
Infrastructure & Citiies Sector
2. Resetting by pressing the button by the Reset connection terminal on the
LMV36... basic unit (X8-04, pin 1)
If the unit is in the lockout position, a reset can be made by pressing the button for 1...3
seconds. Longer or shorter pushes on the button are ignored so that the system
maintains the lockout position.
If the unit is not in the lockout position and the reset button is pressed for 1...6 seconds,
a change to the lockout position takes place.
If this response is not desirable, it is possible to tap the supply for the reset button from the
alarm output, thus achieving the same response as described above under 1.
Error Diagnostic
code code
167 1
Without manual lockout
LMV...
Alarm
Reset
Bild 376/0409
Figure 2: without manual lockout
3. Resetting via the PC software
Refer to the documentation covering the PC software (J7352).
Error Diagnostic
code code
167 3
Basic documentation LMV36...
7 Basic unit
Meaning for the LMV36... system
Manual lockout by contact
With manual lockout
Reset
2
Figure 2: With manual lockout
Meaning for the LMV36... system
Manual lockout by PC software
LMV...
L
Bild 375/0409
69/248
CC1P7544en
25.09.2013