Display Of Service Values (Example); Number Of Faults; Error History; Intensity Of Flame - Siemens LMV36.520A1 Basic Documentation

27.2 Display of service values (example)

27.2.1 Number of faults

To the next parameter

27.2.2 Error history

Refer to chapter Parameter with index, without direct display/Example of parameter 701: Error history!


27.2.3 Intensity of flame

To the next parameter


27.2.4 End of service level

To the start of the service
level
ESC
176/248
Building Technologies Division
Infrastructure & Citiies Sector
P
V h min s %
or /reset
<1s
Note
Can be deleted for service (refer to chapter Parameter list)!
P
V h min s %
or /reset
<1s
Note
Also refer to chapter Intensity of flame during curve settings.
P
V h min s %
P
V h min s %
P
V h min s %
Basic documentation LMV36...
27 Service level
The display shows parameter 161: flashing on
the left, the number of faults that occurred thus
far on the right 0.
Example: Parameter 161: 0
Back to the previous
parameter
The display shows parameter 954: flashing on the
left.
On the right, the flame's intensity is displayed as
a percentage.
Example: 954: 0.0
Back to the previous
parameter
When this display appears, you have reached the
end of the service level.
Display – End – appears flashing.
Back to the previous
parameter
ESC
Press to return to the normal display.
OPErAtE appears for a short moment.
When this display appears, you are back on the
normal display and you can change to the next
level mode.
CC1P7544en
25.09.2013