Siemens LMV36.520A1 Basic Documentation page 185

Adopt the value!
P
V
Press to return to editing mode.
/reset
The value set is adopted.
Note
To detect potential display errors, the value is
displayed 1 place shifted to the right.
Display: Value 2
P
To the next parameter level
Building Technologies Division
Infrastructure & Citiies Sector

/reset
h min s %
V h min s %
Basic documentation LMV36...
28 Parameter level
ESC

P
V
ESC
Press
level.
Display: Parameter 208: flashes, value 0
does not.
ESC
ESC
Press to return to the parameter level.
PArAmeter 208: flashes, value 2 does not.
ESC
ESC
Press to return to the parameter level.
PArAmeter 200: for basic units.
Discard the change!
h min s %
to return to the parameter
Back to the previous
parameter level
185/248
CC1P7544en
25.09.2013