Roland SOLJET Pro III XC-540 Service Notes page 174

One of the messages appears at the completion of the
4
set up. In case of SETUP error, check the followings.
1. Dirt/Scratch on the ENCODER SCALE.
2. Dirt/Scratch on the ENCODER MODULE.
3. ENCODER SCALE is not between the
ENCODER MODULE.
4. Backlash of the CARRIAGE MOTOR GEAR
and the DRIVE GEAR.
5. Fixation between the CARRIAGE and the CARRIAGE
BELT.
6. Bad Contact in the cables.
In case of [HEADBOARD FAILED], the Head Board is
possibly defective.
When Linear Encoder Setup is completed, carry out the
5
[LINEAR CALIB.] in the Service Menu.
In case of an error, check the followings.
6
1. Dirt/Scratch on the ENCODER SCALE.
2. Dirt/Scratch on the ENCODER MODULE.
3. ENCODER SCALE is not between the
ENCODER MODULE.
4. Backlash of the CARRIAGE MOTOR GEAR
and the DRIVE GEAR.
5. Fixation between the CARRIAGE and the CARRIAGE
BELT.
6. Bad Contact in the cables.
LINEAR ENCODER
SETUP COMPLETED
LINEAR ENCODER
SETUP FAILED
LINEAR ENCODER
HEADBOARD FAILED
PRINT MENU
LINEAR CALIB.
NOW PROCESSING..
LINEAR CALIB.
SETUP COMPLETED
LINEAR CALIB.
PRINT MENU
LINEAR CALIB.
NOW PROCESSING..
LINEAR CALIB.
FAILED TO SETUP
4-43
[ ]
[ ]
0.18%
[ ]