Roland SOLJET Pro III XC-540 Service Notes page 96

Cut the Ink Tubes at appropriate length and connect
13
them to the Ink Dampers.
Then, replace the other Ink Tubes in the same way.
Connect the 6 Flexible Cables to the Carriage Board and
14
fix the Nylon Rivets to fix the Clear Plates.
Be careful not to forget to fix the Filters.
Fix the Carriage Board Cover.
15
Fix the Guide Plates and the Cable Guides.
16
Make 3 positions for the Guide Plate blank at the edge of
the Cable Vayor.
Fix the Cable Guide at the position shown in the figure.
Filters
Carriage Board Cover
3-34
Flexible Cables
Guide Plate
Blank
< Rear view of the machine >