Roland SOLJET Pro III XC-540 Service Notes page 191

Move the Tool Carriage to the position under the H mark
4
which is written on the rail.
The rail has an H mark at the point where Tool
H e i g h t A d j u s t m e n t i s m a d e d u r i n g t h e
production of the machine.
H mark indicates the highest position of the
bed. (The position where the space between the
Head and Bed is the smallest.)
Select [30gf] under [FORCE ADJUST] menu.
5
Press [TEST CUT] key to move the Tool Carriage down.
Pull up the handle part of the Tool Holder with the DIAL
6
GAUGE(ST-013) and measure the pressure when the
pen tip leaves the Bed.
Adjust the parameter in the [30gf] menu with [
[ ] keys for the pressure to be 25 to 35gf (0.25N to
0.35N).
Press [ENTER] key to save the settings.
Select [200gf] under [FORCE ADJUST] menu.
7
Press [TEST CUT] key to move the Tool Carriage down.
TOP COVER
RAIL
BELT
TOOL CARRIAGE
CUTTING MENU
FORCE ADJUST
FORCE ADJUST
30gf
30gf
ST-013
] and
TOOL HOLDER
CUTTING MENU
FORCE ADJUST
FORCE ADJUST
200gf
200gf
4-60
[ ]
[ ]
17 16
[TEST CUT]
30gf
17 16
[ ]
[ ]
[ ]
56 57
[TEST CUT]
[ ] [ ]
[ENTER]