Roland SOLJET Pro III XC-540 Service Notes page 178

Turn on the sub power switch while pressing [
3
and [ ] keys to enter the SERVICE MODE.
Setup the SV-G-1270G film on the machine.
Select [OUTLEVEL CHECK] under the [CROPMARK
4
SENS] menu.
Crop Mark will be printed when the [ENTER] key is
pressed.
After printing a Crop Mark, the TOOL CARRIAGE moves
5
to above the Crop Mark automatically.
Adjustment is unnecessary when the displayed MAX
voltage is 2.7 +/-0.2V.
When the MAX voltage is not proper, see the voltage
6
displayed with [ ] on the lower LCD. Adjust the VR on the
TOOL CARRIAGE BOARD so that the voltage with [ ]
changes to 2.7 +/-0.2V.
Due to the ink dry, the voltage displayed with [ ]
decreases in time. This adjustment needs to be
done quickly for smooth operation.
], [ ]
[ ] , [ ] , [
MENU
SERVICE MENU
SERVICE MENU
CUTTING MENU
CUTTING MENU
CROPMARK SENSE
CROPMARK SENSE
OUTLEVEL CHECK
4-47
] + SUB POWER ON
[MENU] key
[ ]
[ ]
[ ]
Min2.5V Max2.7V
[2.5V]
Min2.5V Max2.7V
[2.5V]
VR