Roland SOLJET Pro III XC-540 Service Notes page 162

[VERTICAL ADJUSTMENT]
Select the [VERTICAL] > [TEST PRINT] under the
11
[HEAD ADJUST] menu and press the [ENTER] key.
TEST PATTERN shown on the right will be printed.
12
The test pattern changes if the Base Head is
changed.
Loosen the 3 screws fixing the Head in order as shown in
13
the figure.
Loosen the screws fixing the Head for 1/2 turn.
If the screws are too loose, it may affect the
result of this alignment.
Turn the ADJUSTMENT SCREW to make the lines of each
14
color in the test pattern to be straight.
*Reference*
Position of the printing moves 1/2 line by turning
the screw 30 degrees.
K C K M K Y K Lm K Lc K
K Head is specified as the Base Head.
4-31
SERVICE MENU
PRINT MENU
[ ] [ ]
PRINT MENU
HEAD ADJUST
[ ]
[ ]
HEAD ADJUST
VERTICAL
[ ]
VERTICAL
TEST PRINT
[ ]
2
1
3
ADJUSTMENT SCREW