Roland SOLJET Pro III XC-540 Service Notes page 94

Remove the 4 screws as shown in the figure to remove
5
the Carriage Cover.
Remove the Carriage Board Cover.
6
Remove the Carriage
B o a r d C o v e r b y
p u s h i n g t h e p a r t
indicated by the arrows
because the top part of
the support is easy to
break.
Remove the 2 Nylon Rivets fixing the clear plates. Then,
7
disconnect all the 6 flexible cables that are coming from
the Cable Vayor.
Handle the Filters with care.
The Filters may break when dropped.
Remove the Guide Plates of the Cable Vayor and Cable
8
Guides. Then, take out the flexible cables from the
Cable Vayor.
Carriage Cover
Carriage Board Cover
Filters
Guide Plate
3-32
Flexible Cables
Cable Guide
< Rear view of the machine >