Roland SOLJET Pro III XC-540 Service Notes page 192

Pull up the handle part of the Tool Holder with the
8
TENSION GAUGE(ST-002) and measure the pressure
ST-002
when the pen tip leaves the Bed.
Adjust the parameter in the [200gf] menu with [ ]
and [ ] keys for the pressure to be 195 to 205gf
(1.9N to 2.0N).
Press [ENTER] key to save the settings.
200gf
56 57
TOOL HOLDER
[ ] [ ]
[ENTER]
Select the [30gf] menu under [FORCE ADJUST] menu.
9
Confirm that the force is 25 to 35gf (0.25N to 0.35N)
ST-013
when the tip of the pen leaves the Bed by lifting the
handle part of the Tool Holder with the DIAL TENSION
METER(ST-013).
When the value of the force is not proper, make an
adjustment again.
TOOL HOLDER
4-61