Roland SOLJET Pro III XC-540 Service Notes page 115

3-10 CARRIAGE BELT REPLACEMENT
Turn off the Main Power SW.
1
Remove the following covers.
2
Right I/S Cover
Top Cover
Right Top Cover
Front Rail Cover
Front Cover
Panel Cover
Flexible Cable is connected to the Panel
Board. Do not disconnect the Flexible Cable.
After turning on the Main Power SW, turn on the Sub
3
Power SW while pressing the Left, Right and Down keys
to enter the Service Mode.
To protect the Heads, select [I/S MENU] > [I/S
4
CONTROL] > [CAP] > [OPEN]. And press the [ENTER]
key to move down the Capping Unit.
Main Power SW
< Rear view >
Front Rail Cover
Front Cover
[ ], [ ], [ ] + SUB POWER ON
MENU
SERVICE MENU
SERVICE MENU
I/S MENU
I/S MENU
I/S CONTROL
I/S CONTROL
CAP
CAP
OPEN
3-53
Right Top Cover
Top Cover
Panel Cover
Right I/S Cover
[MENU] key
[ ] [ ]
[ ]
[ ]