Roland SOLJET Pro III XC-540 Service Notes page 235

Others
Explain to switch off and on the machine and check what happens before calling for inquiry,
when [SERVICE CALL] is displayed. It may solve the problem.
Explain the action to take when the head carriage stops over the platen in reference to the User's Manual
[7-6 The Print Heads Stopped Moving].
If the head carriage doesn't go back to the standby position by turning on the sub power again, it is
necessary to cap the heads by the user.
Consumable Parts and
Replacement Cycle
PARTS NAME
Print Head
Wiper
7
Carriage Motor
Cap Top
Ink Tube
Sponge for Flushing
Sponge for Wiper
Battery
Cutter Protection
Pinch Roller
6 billion shots / nozzle (6,000,000 kshots)
* When the Head is replaced, the Dampers should be replaced at
*When the cleaning is done for the 500 times, the message for
replacement of the Wiper is shown on the LCD.
Replace it depending on degree of scratches on it.
Replace it depending on degree of the rubber part wear.
7-14
LIFE TIME
the same time.
6 months or
Wiping 3,000 times or
Ribbing 100 times
1,500 hours
6 months
3,000 hours
6 months
12 months
24 months