Roland SOLJET Pro III XC-540 Service Notes page 138

THERMISTOR CHK
SERVICE MENU
HEAD:25 C/ 77 F
THERMISTOR CHK
THERMISTOR CHK
BOARD 25 C/ 77 F
SERVICE MENU SUB MENU
SUB MENU SERIAL NO.
SUB MENU
CHANGE INKTYPE
SUB MENU
FILL INK
SUB MENU
PUMP UP
SUB MENU
HEAD REPLACE
SUB MENU
HEAD WASH
This menu is used for checking Thermistor. It displays the temperatures read from the thermistor placed on the K head, HEAD4, and
the thermistor placed on the Head Board (TH1). The temperature on the left is in Celsius ans the right is in Fahrenheit.
Since the temperature of the device on the Head Board may rise, [HEAD] and [BOARD] shows higher temperature than the room temperature.
Confirm that the temperature is not extremely low, such as 0 Celsius, or extremely high, such as 100 Celsius. The temperatures of
[HEAD] and [BOARD] are not necessarily the same.
SERIAL NO.
ZS00000
CHANGE INKTYPE
MAX cm MAX cm
This menu is to change Ink Type. Different from the process in the user menu,
operations such as Head Wash and Ink Fill are not included.
This menu is used as a correction purpose when a wrong type ink is selected.
When the ink type is changed, Ink System is initialized internally. Then, it exits
the menu and Setup is canceled.
FILL INK
A B C
When ink is not filled
SELECT INK TYPE
E-SOL Max LcLm
PUMP UP
A B C
REMOVE SOL CRT.
123456789101112
Goes next, when cartridge is removed
HEAD REPLACE
A B C
SET SOLCL-LIQUID FILLING INK...
123456789101112
Goes next, when cleaning cartridge is set
CHECK
DRAIN BOTTLE
HEAD WASH
A B C
REMOVE SOL CRT.
123456789101112
Goes next,
when cartridge is removed
This menu is for entering the Serial No. of the machine in 7 digits. Cursor moves between digits
with [right] and [left] keys. The parameter can be changed with [up] and [down] keys.
NOW PROCESSING..
BUSY LED flashes
CHECK
DRAIN BOTTLE
INSTALL SET SOL CRT.
DRAIN BOTTLE 123456789101112
Goes next, when cartridge is set
FILLING INK... CHECK
DRAIN BOTTLE
Goes next, when completed
CHECK
DRAIN BOTTLE
PUMPING-UP...
Goes next, when completed
CHECK
DRAIN BOTTLE
Goes next, when cartridge is removed
REMOVE SOL CL
123456789101112
FILLING INK...
SET SOL CRT.
123456789101112
Goes next, when cartridge is set
CHECK
DRAIN BOTTLE
WASHING HEAD...
SET SOLCL-LIQUID
123456789101112
Goes next,
when cleaning cartridge is set
REMOVE SOL CL
123456789101112
Goes next,
when cleaning cartridge is removed
4-7
To Setup View
Ink Type Max cm : ECO-SOL Max CMYKLcLm
Max 2MC: ECO-SOL Max CMYKMC
UNKNOWN: Ink Type not specified
PIG cm : Pigment LcLm
Fills Ink to each print head. A to C shown on the lower
LCD are the head groups. Cursor can be moved with
[left] and [right] keys. Use [up] and [down] keys for
ON/OFF. By pressing [ENTER] key, it starts to fill ink
for the selected head groups. To exit the menu, press
[left] key when the cursor is on A.
NOTE: Normally, FILL INK is to be performed on the
three groups together. Performing this on
individual head group should be only for a
recovery when PUMP UP or HEAD WASH is
performed individually.
Removes ink from each print head. The difference
from the user menu is that head group can be
selected.
NOTE: When this is performed on individual head
group, the normal maintenance operations
cannot be performed. Normally, PUMP UP is
to be performed on the three groups together.
When it is necessary to perform it individually,
fill the same type of ink for recovery with FILL
INK menu immediately.
Head wash and ink filling
after replacing head
REMOVE SOL CRT.
123456789101112
FILLING INK...
Goes next,
when cleaning cartridge is removed
CHECK
DRAIN BOTTLE
Washes print heads. A to C shown on the lower
LCD are the head groups. Cursor can be moved with
[left] and [right] keys. Use [up] and [down] keys for
ON/OFF. By pressing [ENTER] key, it starts to wash
the selected head groups. To exit the menu, press
[left] key when the cursor is on A.
NOTE: When this is performed on individual head
group, the normal maintenance operations
cannot be performed. Normally, HEAD WASH
is to be performed on the three groups
together. When it is necessary to perform it
individually, fill the same type of ink for
recovery with FILL INK menu immediately.
WASHING HEAD...
Goes next, when completed