Roland SOLJET Pro III XC-540 Service Notes page 141

HISTORY MENU
SERVICE MENU
HISTORY MENU MOTOR GROUP
In History Menu, the parameters are separated in groups
by categories. The parameters can be displayed or cleared
by entering the menu of each groups.
SERVICE MENU REPORT
SERVICE REPORT
REPORT
REPORT
HISTORY REPORT
REPORT
CARTRIDGE
REPORT
EVENT LOG
REPORT
ALL
REPORT
SERIAL
MOTOR HOURS F MOTOR HOURS F
3 hours CLEAR
CATEGORIES : MOTOR GROUP / HEAD GROUP /
MAINTE GROUP / WIPE GROUP /
PRINT GROUP / CUTTING GROUP /
INK GROUP / HEATER GROUP /
ERROR GROUP / SYSTEM
SERVICE REPORT
HEAD H1
H1/H2/H3/H4/H5/H6
HISTORY REPORT
HEAD H1
H1/H2/H3/H4/H5/H6
CARTRIDGE
HEAD H1
H1/H2/H3/H4/H5/H6
SELECT MAXIMUM EVENT LOG
100 LOGS HEAD H1
Setting Value : 100LOGS/200LOGS/ALL
ALL
HEAD H1
4-10
The menu shown on the upper LCD can be changed with [up] and
[down] keys. The corresponding parameter is shown on the lower
LCD. Refer to the HISTORY MENU List on the following pages.
Press [right] key to enter [CLEAR] menu, and parameter can be
cleard by pressing [ENTER] key.
Reports can be printed. The Head to print the report is selectable considering the case of head
trouble. Select a head with [up] and [down] key and press [ENTER] key to start printing.
SERVICE : Service Report is printed. It prints the System Report of the normal menu with additional
Service Information.
HISTORY : History Report is printed.
CARTRIDGE : Ink Cartridge IC Report is printed.
EVENT LOG : Event Log Report is printed. The number of Event to be printed is selectable from
100/200/ALL(400).
ALL : All Reports are printed together. (System Report, Service Report, History Report,
Ink Cartridge IC Report, Event Log Report).
SERIAL : Service Report and History Report can be sent to RS-232C Serial using special tool.
(9600bps, N81, X : ON/OFF)
Required Printing Area
SERVICE : W350 L450mm
HISTORY : W250 L220mm
CARTRIDGE : W250 L100mm
EVENT LOG/100 LOGS : W350 L200mm
EVENT LOG/200 LOGS : W350 L330mm
EVENT LOG/ALL(400) : W350 L590mm
ALL : W800 L350mm