Roland SOLJET Pro III XC-540 Service Notes page 74

Remove the 5 screws shown in the figure to remove the
5
Pump Cover together with the Right Inner Plate.
Select [I/S MENU] > [I/S CONTROL] > [CAP] >
6
[CLOSE], and press the [ENTER] key. The Capping Unit
moves up. Press the [ENTER] key 3 times, because the
Capping Unit moves up in 3 steps.
Turn off the Sub Power SW, and then turn off the Main
7
Power SW.
Disconnect the tube (Black) of the Cap Top from the
8
Pump.
Make sure to replace the Cap Top one by one.
If you disconnect the plural tubes at the same
time, there is the risk of wrong connections.
Pump Cover
SERVICE MENU
I/S MENU
I/S MENU
I/S CONTROL
I/S CONTROL
CAP
CAP
CLOSE
Main Power SW
3-12
Right Inner Plate
[ ] [ ]
[ ]
[ ]
[ ] [ ]
Pump