Roland SOLJET Pro III XC-540 Service Notes page 143

MAINTENANCE GROUP
Item
MAINTE. COUNT Number of times the Head Maintenance has been performed
TOTAL TIME Lapsed time from the last Head maintenance
PRINTING TIME Printing time from the last Head Maintenance
CLEAR ALL Clear all the value in the MAINTENANCE GROUP.
WIPER GROUP
Item
WIPING COUNT Number of times the Wiping has been performed
RUBBING COUNT Number of times the Rubbing has been performed
WIPE REPLACE Number of times the Wipe has been replaced
CLEAR ALL Clear all the value in the WIPE GROUP.
PRINT GROUP
Item
PRINTING TIME Total time of printing performed
PRINT PAGES Number of pages printed
CLEAR ALL Clear all the value in the PRINT GROUP.
INK GROUP
Item
CARTRIDGE 1 Number of times the Ink Cartridge 1 has been changed
CARTRIDGE 2 Number of times the Ink Cartridge 2 has been changed
CARTRIDGE 3 Number of times the Ink Cartridge 3 has been changed
CARTRIDGE 4 Number of times the Ink Cartridge 4 has been changed
CARTRIDGE 5 Number of times the Ink Cartridge 5 has been changed
CARTRIDGE 6 Number of times the Ink Cartridge 6 has been changed
CARTRIDGE 7 Number of times the Ink Cartridge 7 has been changed
CARTRIDGE 8 Number of times the Ink Cartridge 8 has been changed
CARTRIDGE 9 Number of times the Ink Cartridge 9 has been changed
CARTRIDGE 10 Number of times the Ink Cartridge 10 has been changed
CARTRIDGE 11 Number of times the Ink Cartridge 11 has been changed
CARTRIDGE 12 Number of times the Ink Cartridge 12 has been changed
CHANGE INK TYPE Number of times the Ink Type has been changed
CLEAR ALL Clear all the value in the INK GROUP.
ERROR GROUP
Item
SERVICE CALL Number of times the Service Call has occurred
S-CALL HISTORY Service Call Number of the last 5 Calls.
MOTOR ERROR F Number of times the Feed Motor Error has occurred
MOTOR ERROR S Number of times the Scan Motor Error has occurred
LOW TEMP.ERR. Number of times the Low Temperature Error has occurred
HIGH TEMP.ERR. Number of times the High Temperature Error has occurred
EMERG. CAPPING Number of times the Emergency Capping Error has occurred
START UNCAPPED Number of times the machine has started uncapped
CLEAR ALL Clear all the value in the ERROR GROUP.
HEATER GROUP
Item
PRE USE TIME Total time of PRE heater used
PRINT USE TIME Total time of PRINT heater used
DRYER USE TIME Total time of DRYER used
OPT. USE TIME Total time of OPTION DRYER used
CLEAR ALL Clear all the value in the HEATER GROUP.
CUTTING GROUP
Item
CUTTING TIME Total time of Cutting performed
DISCONNECT CARR. Number of times the carriages has been disconnected
CLEAR ALL Clear all the value in the CUTTING GROUP.
SYSTEM GROUP
Item
POWER ON COUNT Number of times Subpower has been turned on
POWER ON TIME Total time of Subpower ON
SLEEP TIME Total time of the machine in Sleep Mode
SHEETCUT COUNT Number of times the Sheet Cut has been performed
PECK USED COUNT Number of times PECK has been used
CLEAR ALL Clear all the value in the SYSTEM GROUP.
Contents
Contents
Contents
Contents
Contents
Contents
Contents
Contents
Unit
times
hour This value is cleared automatically after carrying out the Head Maintenance.
hour This value is cleared automatically after carrying out the Head Maintenance.
Unit
times This value is cleared automatically after replacing it.
times This value is cleared automatically after replacing it.
times
Unit
hours Test print time is excluded.
pages
Unit
times
times
times
times
times
times
times
times
times
times
times
times
times
Unit
times
No.
times
times
times
times
Number of times of forcible capping for Head dry prevention that works when cap is left open for 3
times
minutes or more due to cover open or other reasons.
times When cap is left open, it is detected when machine is started.
Unit
hour
hour
hour
hour
Unit
hour Test Print time is excluded.
times Disconnection of Tool Carriage and Head Carriage
Unit
times
hour SLEEP time is excluded.
hour
times It counts Auto Sheet Cut performed by both command and oanel.
times
4-12
Reference
Reference
Reference
Reference
Reference
Reference
Reference
Reference