Roland SOLJET Pro III XC-540 Service Notes page 167

[ BIDIRECTION ADJUSTMENT ]
Select [BI-DIR.DEFAULT] > [TEST PRINT] in the [HEAD
21
ADJUST] menu and press the [ENTER] key.
Following TEST PATTERN will be printed.
22
Find the position where the two lines are overlapping and check the number of each color.
In case of having problem selecting one between two numbers, 1/2 is also available when setting up the value.
The number with
Head Position :
High
Head Position :
Low
is the current setting.
H6
H5
H4
H3
H2
H1
DT3,High +10 +11 +12 +13 +14 +15 +16 +17 +18 +19 +20 +21 +22 +23 +24 +25 +26 +27 +28 +29 +30 +31 +32 +33 +34 +35 +36 +37 +38 +39 +40 +41 +42 +43 +44 +45 +46 +47 +48 +49 +50
H6
H5
H4
H3
H2
H1
DT1,High +10 +11 +12 +13 +14 +15 +16 +17 +18 +19 +20 +21 +22 +23 +24 +25 +26 +27 +28 +29 +30 +31 +32 +33 +34 +35 +36 +37 +38 +39 +40 +41 +42 +43 +44 +45 +46 +47 +48 +49 +50
H6
H5
H4
H3
H2
H1
DT3,Low +10 +11 +12 +13 +14 +15 +16 +17 +18 +19 +20 +21 +22 +23 +24 +25 +26 +27 +28 +29 +30 +31 +32 +33 +34 +35 +36 +37 +38 +39 +40 +41 +42 +43 +44 +45 +46 +47 +48 +49 +50
H6
H5
H4
H3
H2
H1
DT1,Low +10 +11 +12 +13 +14 +15 +16 +17 +18 +19 +20 +21 +22 +23 +24 +25 +26 +27 +28 +29 +30 +31 +32 +33 +34 +35 +36 +37 +38 +39 +40 +41 +42 +43 +44 +45 +46 +47 +48 +49 +50
4-36
SERVICE MENU
PRINT MENU
[ ] [ ]
PRINT MENU
HEAD ADJUST
[ ] [ ]
HEAD ADJUST
BI-DIR.DEFAULT
[ ]
BI-DIR.DEFAULT
TEST PRINT
[ ]