Press MENU key, and set [IP ADDRESS], [SUBNET MASK]
3
and [GATEWAY ADDR.].
Press [
] and [
] keys for moving between digits, and
[
] and [
] keys for selecting value. After setting an
address, press ENTER key to go next address setting.
When [GATEWAY ADDR.] is set, it returns to the waiting
mode for receiving the firmware by pressing ENTER key.
The setting made here is only temporary for the
firmware installation and it is not saved.
Start the Peck4 on PC.
4
[Peck4] screen is displayed, and click [Select Port] button.
Select [Type 3] ProIII etc. from [Product].
5
Also, Select [Via Network] and input IP address of XC-540
specified ealier.
Click [OK] button.
4-21