Roland SOLJET Pro III XC-540 Service Notes page 228

Loading and Cutting
Off Media
Explain following items in reference to the User's Manual [2-2 Loading and Cutting Off Media] and
[8-1 Usable Media].
Load the Roll Media
!! IMPORTANT !!
- Never load media that weights more than 30 kg (67 lb.).
- Attach the media flanges to the roll media by matching to the inner diameter of the roll media core.
- Be sure to remove and properly store the roll media when not in use. If roll media is kept loaded on the
machine, the media may sag by its weight and it may affect the printing result.
- Adjust [Head Height], [Feed Calibration] and [Bidirectional Adjustment] when using another type of media.
Set the Media Clamps
!! IMPORTANT !!
- The left and right of Media Clamps differ from one another.
- Set the Media Clamps firmly.
- Be sure to set the Media Clamps at the correct positions.
How to cut off Media
!! IMPORTANT !!
- Before you perform cutoff, be sure to detach the media clamps.
Conditions for Usable Media
7-7
7