Roland SOLJET Pro III XC-540 Service Notes page 3

To Ensure Safe Work
About
About the Symbols
In addition to the
: Tips and advise before the adjustment.
Turn off the primary power SW
before servicing.
and
Used for instructions intended to alert the operator to the risk of death
or severe injury should the unit be used improperly.
Used for instructions intended to alert the operator to the risk of injury
or material damage should the unit be used improperly.
* material damage refers to damage or other adverse effects caused
with respect to the home and all its furnishings, as well to domestic
animals or pets.
The symbol alerts the user to important instructions or warnings. The specific
meaning of the symbol is determined by the design contained within the triangle.
The symbol at left means "danger of electrocution".
The symbol alerts the user to items that must never be carried out (are
forbidden). The specific thing that must not be done is indicated by the design
contained within the circle.
The symbol at left means not to touch.
The symbol alerts the user to things that must be carried out. The specific thing
that must be done is indicated by the design contained within the circle. The
symbol at left means the power-cord plug must be unplugged from the outlet.
and
Notices.
symbols, the symbols shown below are also used.
Do not recharge, short-circuit,
disassemble the lithium battery, nor
put it into fire.
It may cause heat, explosion and fire.
Put tape around the lithium battery
for insulation for disposal or
preservation.
It may cause heat, explosion and fire.