Roland SOLJET Pro III XC-540 Service Notes page 126

Move the Tool Carriage Board to the far left. Pull the Flexible Cable rightward with holding the Inner Protection
16
Plate at the left side so that the Flexible Cable fits to the Inner Protection Plate.
If the Flexible Cable is not pulled enough or pulled too much, there will be the slack in the Protection Plate.
OK
NG
NG
Fix the Flexible Cable with the Cable Holder with keeping
17
the condition of 16 .
Fix the Flexible Cable with the other Cable Holder.
18
Fix the Cable Holder with pulling the Flexible
Cable not to have the slack between the 2
Cable Holders.
Tool Carriage Board
Inner Protection Plate
3-64
Flexible Cable
Flexible cable is not pulled enough.
Flexible cable is pulled too much.
Cable Holder
Cable Holder