Roland SOLJET Pro III XC-540 Service Notes page 226

Assembling
Set up following items in reference to the Setup Guide [3.Assembling and Installing].
In case of setting up DU-540, refer to the DU-540 Uer's Manual [1-4 Installing on the Printer].
Assemble the Stand
Attach the Included Items
Mount the Machine
Install the Drain Bottle
Attach the Ink-cartridge Tray
Removing the Packing Materials
Connect the Cables
Connect following cables in reference to the Setup Guide [4.Connect the Cables].
Connect the Cable of the Take-up Unit
Connect the Power Cable
Connect the Ethernet cable (suggested 100Base-TX) to the Computer (Network).
*Make sure to use the Ethernet cable which is category 5 and above.
Preparation
Perform following items in reference to the Setup Guide [5.Installing the Ink Cartridges] and [6.Install the Blade].
Filling with Ink
!! IMPORTANT !!
- 4 pcs. of the SOL INK cleaning cartridges are required in this work.
- Gently shake the cartridge when the new ECO-SOL MAX Ink Cartridge is installed.
Install the Blade
7-5
7