Roland SOLJET Pro III XC-540 Service Notes page 155

Start the Peck4 on PC.
12
[Peck4] screen is displayed, and click [Put Parameters]
button.
[OPEN] screen is displayed.
13
Select the System Parameter file that is saved before the
main board replacement.
Click [Open]. Peck4 starts to send the System Parameter
to XC-540.
Click [Get Report] button to import the System Report file.
14
Confirm that the System Parameter is reloaded properly.
The addresses set at the step 11 are replaced
with the addresses saved in the System
Parameter as [Put Parameter] is executed.
4-24