Roland SOLJET Pro III XC-540 Service Notes page 204

Confirm that [START] is selected, and press [ENTER]
4
key to turn on the take-up unit.
[START] or [STOP] can be selected with
[ ] and [
The current setting is displayed on the left
and the new setting is diplayed on the right.
Set the AUTO switch of the Take-up Unit to either
5
FORWARD or BACKWARD.
Move the Dancer Roller up and down by hand, and
6
confirm that the drive part rotates.
The operation status of Take-up Unit can be
confirmed also on the LCD. [ * ] is diplayed
on the right side of upper LCD while taking-
up, and not displayed while not taking-up.
TU
START
Select [STOP] with [
7
[ENTER] key.
The setting of [STOP] is canceled when
exiting the menu. The initial setting is
[START] every time entering [TU] menu.
] keys.
START
] and [ ] keys, and press
TU
START
Drive Part
DANCER ROLLER
TU
START
4-73
START
[ ]
STOP
[ ]