Table of Contents
Advertisement
Remove the Spring.
4
Disconnect the connector of the motor cable.
5
Remove the 4 screws as shown in the figure to remove
6
the Motor together with the Flange.
Remove the 4 screws to remove the Motor from the
7
Flange.
Fix the Motor Cable of a new Motor using a cable tie
without bending the cable root, and then fix the new
Motor to the Flange.
Be careful with the fixing direction of the
Flange.
Screw
3-22
Spring
< Front view >
Connector
Flange
Screw
Flange
- Quick Links:
- Head Replacement
- Service Mode
- Head Alignment
Hide quick links:
Advertisement
Table of Contents
