Performing A Wireless Function Test - Christie HS Series Service Manual

The projector returns the following: (SYSx).

Performing a wireless function test

Before performing the wireless function test, a USB dongle must connect the projector and PC Host
directly. When the connection is made, the PC shows a USB device disk.
The following browsers are supported for this test:
• Internet Explorer: IE8 for WinXP, IE9 or higher for Win7, and IE11 for Win8.1 or Win10 is
required.
• Chrome: Version 49 or higher is required.
• Firefox: Version 46 or higher is required.
• Safari: Not supported.
To perform the wireless function test, complete the following steps.
1. Connect to the wireless SSID.
a. Insert the WiFi USB dongle (1DWUSB-BGN) into the USB port on the projector.
b. Power on the projector.
c. Obtain the WiFi SSID from the on-screen display.
Navigate to Main Menu > Configuration > Communications > WLAN.
d. Connect your PC device to the wireless SSID for the selected projector.
Example: Christie@0111000123.
2. Download Christie presenter.
a. Use Internet Explorer to navigate to http://192.168.1.100.
b. Select Administrator for access type.
c. Enter the password admin.
d. Click Login.
e. Click Download.
f. Click Save.
HS Series D13 Service Manual
020-000892-03 Rev. 1 (12-2019)
RJ45 to HDBaseT port
Power
RS232 to PC
HDMI input
Service setups
38