12. Unplug the three connectors securing the power supply module.
To LVPS BD B2
13. Remove the five M3 screws with a Phillips #1 screwdriver securing the shielding cover on the
left of the power supply.
14. Remove the top cover interlock switch harnesses from the clips.
15. Unplug the main power supply to DC 12 power supply harness connector.
16. Lift the shielding cover on the left of the power supply.
17. Remove the two M3 screws with a Phillips #1 screwdriver and lift the mylar cover.
HS Series D13 Service Manual
020-000892-03 Rev. 1 (12-2019)
To LVPS BD B1
Electronics
To LVPS BD R
89