Recovering When The Lan Firmware Upgrade Fails - Christie HS Series Service Manual

2. If the model name, serial number, and firmware version are not detected automatically, on the
Update Details tab, select Restore (Continue to the last update state).
3. Click next.
The firmware upgrade procedure runs automatically and takes two hours to complete.
4. When the firmware upgrade is complete, to verify the firmware version, enter the Service mode
and select Projector Info.
5. Click Exit.

Recovering when the LAN firmware upgrade fails

If the firmware recovery did not work, complete the following steps to recover the local area
network.
1. Connect AC power and turn the power switch to on position.
2. Press the UP key followed by the POWER key.
3. When the Ethernet LED flashes twice, to power on the projector, press Power.
4. Connect the projector to the PC with a mini USB cable.
5. Download the latest firmware program file from the Christie website (www.christiedigital.com).
a. Unzip the firmware file and save it to the desktop.
b. Double-click the firmware folder.
c. Choose the upgrade file based on the capability of the PC:
• 64-bit system execute FlashUpgrader_x64.exe
• 32-bit system execute FlashUpgrader_x32.exe
6. To execute the FlashUpgrader setup, click FlashUpgrader.exe.
HS Series D13 Service Manual
020-000892-03 Rev. 1 (12-2019)
Firmware
46