Page 1
Installation and Setup Guide 020-002038-01 Christie HS Series 2K...
Page 2
Christie's control such as maintenance of the product in proper working conditions. Performance specifications are based on information available at the time of printing. Christie makes no warranty of any kind with regard to this material, including, but not limited to, implied warranties of fitness for a particular purpose.
Introduction This manual is intended for Christie qualified installers and trained operators of HS Series 2K projection systems. For complete HS Series 2K product documentation and technical support, go to www.christiedigital.com. Safety and warning guidelines Read all safety and warning guidelines before installing or operating the projector. This projector must be operated in an environment that meets the operating range specification.
Caution! If not avoided, the following could result in minor or moderate injury. • ELECTRICAL and BURN HAZARD! Use caution when accessing internal components. • Only Christie qualified technicians are authorized to use the tools provided in the toolbox. Laser safety precautions This projector has been classified as Class 1 Laser Product-Risk Group 3 according to the IEC 60825-1:2014 and IEC 62471-5:2015 standard.
Page 8
• Temporary show installations containing Risk Group 3 laser-illuminated projectors may be installed by Christie or sold or leased only to valid laser light show variance holders (laser light show manufacturers) for image projection applications. Such manufacturers may currently hold a valid variance for production of Class IIIb and IV laser light shows and/or for incorporation of the Risk Group 3 laser-illuminated projectors into their shows.
Learn about the labels that may be used on the product. Labels on your product may be yellow or black and white. General hazards Hazard warnings also apply to accessories once they are installed in a Christie product that is connected to power. Fire and Shock Hazard To prevent fire or shock hazards, do not expose this product to rain or moisture.
Contact your dealer Record the information about your projector and keep this information with your records to assist with the servicing of your projector. If you encounter a problem with your Christie projector, contact your dealer. Purchase record...
A web page using Ethernet, or from a PC or device using a wireless USB dongle (optional) How the projector works The HS series 2K projector accepts a variety of input signals for a wide range of commercial projection applications.
Product documentation For installation, setup, and user information, see the product documentation available on the Christie Digital Systems USA Inc. website at www.christiedigital.com. Read all instructions before using or servicing this product. 1. Access the documentation from the Christie website: •...
Christie recommends a 20 A rated wall breaker for the installation. To ensure safe operation, only use the AC power cord provided with the product or recommended by Christie. See...
• Determine the lens throw ratio. For more information detailing the throw ratio for each lens, refer to the HS Series 2K Lens Throw Ratios Technical Reference (P/N: 020-102953-XX). • 360 degree free orientation operation When installing the projector in portrait orientation, Christie recommends the built in keypad and power inputs face upwards.
Refer to the installation instructions and safety guidelines provided in the kit (such as Christie One Mount Plus, P/N: 140-117100-XX, or Christie One Aluminum Rigging Frame, P/N: 140-137102-XX).
Warning! If not avoided, the following could result in death or serious injury. • Turn off the projector and remove the power cord, before installing or replacing a lens. Only use the lens compatible with Christie HS Series 2K projectors. 1. Remove the dusk cover from the lens opening.
200-240V, 50/60Hz, 8.5A To ensure safe operation, only use the AC power cord provided with the product or recommended by Christie. Connect the AC power cord to the AC inlet on the projector. HS series 2K Installation and Setup Guide 020-002038-01 Rev.
2. Ensure the lens has been installed in the projector by a Christie qualified service technician. Warning! If not avoided, the following could result in death or serious injury. • Installing or replacing a lens must be done by a Christie qualified service technician to avoid exposure to dangerous emission levels.
• At +100% offset, all of the image appears above the lens center. The following show the vertical and horizontal image offsets for the HS Series 2K projectors: • Vertical image offset: 0%...
• To tighten the set screws, turn counterclockwise. • To loosen the set screws, turn clockwise. Christie recommends adjusting the set screws 1/4 turns each time. The balance between the set screws is subtle and a small adjustment can make an obvious change on the screen.
Connecting to devices This section covers the information on connecting the HS Series 2K projector to a computer and video equipment. Connecting to a computer Learn what cables/connectors can be used to connect to various devices. Desktop Laptop Monitor DISPLAY PORT...
Signal connectivity specifications Identify the signal connectivity specifications for the HS series 2K projector. The list of formats listed below are not exhaustive and other formats may be supported. For more information, contact Christie Technical Support. HDMI video formats Identify the video formats for the HDMI input.
Page 45
Corporate of ces Christie Digital Systems USA, Inc. Cypress ph: 714 236 8610 Christie Digital Systems Canada Inc. Kitchener ph: 519 744 8005 Mexico ph: +52 55 4744 1790 United States (Arizona) ph: 602 943 5700 United States (New York) ph: 646 779 2014 For the most current technical documentation, visit www.christiedigital.com.