Christie HS Series Service Manual page 80

See Replacing the main board and media board
3. Remove the rear cover.
See Removing the rear cover
4. Remove the I/O board.
See Removing the I/O board
5. Remove the front cover.
See Removing the front cover
6. Remove the left-side cover.
See Removing the left-side cover
7. Remove the power supply module from the projector.
See Replacing the DC 12V power supply
8. Remove the laser driver board.
See Replacing the blue1 and 2 laser driver board
board on page 106.
9. Remove the complete light engine.
See Replacing the complete light engine
10. Remove the color wheel.
See Replacing the color wheel
11. Remove the screw (indicated by the arrow) with a Phillips #1 screwdriver securing the engine
lock spring.
12. Remove the DMD cold plate.
HS Series D13 Service Manual
020-000892-03 Rev. 1 (12-2019)
on page 99.
on page 64.
on page 104.
on page 65.
on page 67.
on page 87.
on page 105,
on page 77.
on page 78.
Replacing the red laser driver
Optics
80