Christie HS Series Service Manual page 96

9. Remove the four M3 screws with a Phillips #1 screwdriver securing the DMD thermal module.
10. Remove the two M2.6 screws with a Phillips Jewelers screwdriver securing the TEC module.
11. Separate the TEC module and plastic cover.
12. Replace the TEC module.
When replacing the TEC module ensure the thermal grease is spread evenly.
13. To re-install, follow these steps in reverse order.
HS Series D13 Service Manual
020-000892-03 Rev. 1 (12-2019)
Electronics
96