Wireless Function Test; Network Setting; Download Ezview; Install The Ezview - Christie Captiva DHD400S Service Manual

Service Setup

Wireless Function Test

Before using this function, a USB dongle is needed to connect projector and PC Host directly.
When the connection is OK, the PC will show a USB device disk.

Network Setting

1. Insert the WiFi USB dongle into the USB port on the projector input panel.
2. Power on the Projector.
3. Press "INPUT". When the Input menu appears, press the keys to select "Multimedia" and the
"Enter" key to confirm.
4. On Multimedia menu, select Lap/top.

Download EZview

Internet Explorer version 8 or higher is required.
1. Enable your laptop/notebook WiFi function, and search the AP name listed in the Wi-Fi network
list.
2. Use Internet Explorer to navigate to http://192.168.111.1.
3. Click Wifi and select "Windows" to download EZ-View.exe.

Install the EZview

1. Double-click EZview.
2. Click Next.
3. Click Next.
4. Click OK.
5. Click Finish.

Wireless Testing

1. Launch "EZview" application and enter the control code shown on the right bottom side of the
screen.
2. Wait until the connection is established. The media files on your laptop/notebook can be accessed
using the projector.
11 Captiva Service Manual
020-000867-03 Rev. 1 (05-2018)