10. To disassemble the complete light engine, remove nine M3 screws with a Phillips #1
screwdriver.
11. Replace the complete light engine.
12. If required, replace the light engine.
To remove light engine, hold the light engine so to avoid any shifting or misalignment.
See
Replacing the light engine
13. To re-install, follow these steps in reverse order.
Replacing the color wheel
Replacing the color wheel must be done in a clean room.
To remove the color wheel, complete the following steps.
1. Remove the top cover.
See
Removing the top cover
2. Remove the main board and main board bottom shielding.
See
Replacing the main board and media board
HS Series D13 Service Manual
020-000892-03 Rev. 1 (12-2019)
on page 82.
on page 64.
on page 99.
Optics
78