Christie HS Series Service Manual page 83

See Removing the rear cover
4. Remove the I/O board.
See Removing the I/O board
5. Remove the front cover.
See Removing the front cover
6. Remove the left-side cover.
See Removing the left-side cover
7. Remove the power supply module from the projector.
See Replacing the DC 12V power supply
8. Remove the laser driver board.
See Replacing the blue1 and 2 laser driver board
board on page 106.
9. Remove the complete light engine.
See Replacing the complete light engine
10. Remove the color wheel.
See Replacing the color wheel
11. Remove the combiner module.
See Replacing the combiner module
12. Remove the TEC module.
See Replacing the TEC module
13. Remove the DMD board.
See Replacing the DMD board
14. Remove the DMD.
See Replacing the DMD
15. Remove the DMD mask from the light engine module.
16. Replace the light engine.
17. To re-install, follow these steps in reverse order.
HS Series D13 Service Manual
020-000892-03 Rev. 1 (12-2019)
on page 64.
on page 104.
on page 65.
on page 67.
on page 87.
on page 77.
on page 78.
on page 79.
on page 95.
on page 109.
on page 81.
on page 105, Replacing the red laser driver
Optics
83