Replacing Fans 4, 5, 6, And 7 - Christie HS Series Service Manual

5. Remove the fan harnesses from the clips.
6. To separate the fan from the shielding, remove the six M3 screws with a Phillips #1 screwdriver.
7. Remove the corresponding fan from the rubber.
8. Replace the affected fan.
9. To re-install, follow these steps in reverse order.

Replacing fans 4, 5, 6, and 7

The fans 4, 5, 6, and 7 draw the air into the projector and provides exhaust cooling for the pump and
radiator module.
1. Remove the top cover.
See Removing the top cover
2. Remove the main board and main board bottom shielding.
See Replacing the main board and media board
3. Remove the nine screws securing the thermal cooling fan module.
HS Series D13 Service Manual
020-000892-03 Rev. 1 (12-2019)
on page 64.
on page 99.
Ventilation and cooling
72