3. If using Windows 7, run as administrator.
Installing the firmware upgrade utility
To update the firmware on your projector, you must install the firmware update utility on your PC.
1. Download the latest firmware program file from the Christie website (www.christiedigital.com).
2. Unzip the file to the desktop and open the folder created.
3. Execute Wizard OPFU.EXE.
Upgrading the firmware
Examples shown in the instructions may have minor differences compared to the firmware update for
your specific projector model. Where applicable, these instructions note important differences
between models.
To complete the firmware upgrade process, complete the following steps.
1. Double-click the Wizard OPFU.EXE.
HS Series D13 Service Manual
020-000892-03 Rev. 1 (12-2019)
Firmware
42