Performing A Wireless Function Test - Christie GS Series Service Manual

The projector returns (SYSx).

Performing a wireless function test

Before performing the wireless function test, a USB dongle must connect the projector and PC Host
directly. When the connection is made, the PC shows a USB device disk.
The following browsers are supported for this test:
• Internet Explorer: IE8 for WinXP, IE9 or higher for Win7, and IE11 for Win8.1 or Win10 is
required.
• Chrome: Version 49 or higher is required.
• Firefox: Version 46 or higher is required.
• Safari: Not supported.
To perform a wireless function test, complete the following steps.
1.Connect to the wireless SSID.
a.Insert the WiFi USB dongle (1DWUSB-BGN) into the USB port on the projector input panel.
b.Power on the projector.
c.Obtain the WiFi SSID from the on-screen display menu Main Menu > Configuration >
Communications > WLAN.
d.Connect your PC device to the wireless SSID for the selected projector.
For example: Christie@0111000123.
2.Download Christie Presenter.
a.Use Internet Explorer to navigate to http://192.168.1.100.
b.For the Access type, select Administrator.
c.Enter the password admin.
d.Click Login.
e.Click Download.
f.Click Save.
3.Install the Christie Presenter.
a.Double-click Christie Presenter.
b.Click OK.
GS Series 1075 Service Manual
020-001236-02 Rev. 1 (12-2019)
RJ45 to HDBaseT port
Power
RS232 to PC
HDMI input
Service setups
37