Performing A Wireless Function Test - Christie H Series Service Manual

The projector feeds back the following:

Performing a wireless function test

To preform the wireless function test, complete the following steps.
1. Connect to the wireless SSID.
a. Insert the WiFi USB dongle (1DWUSB-BGN) into the USB port on the projector input
panel.
b. Power on the projector.
c. Obtain the WiFi SSID from the on-screen display menu Main Menu > Configuration >
Communications > WLAN.
d. Connect your PC device to the wireless SSID for the selected projector. Example:
Christie@0111000123.
2. Download Christie presenter.
Internet Explorer version 8 or higher is required.
i
a. Use Internet Explorer to navigate to http://192.168.1.100.
b. Select Administrator for access type.
c. Enter the password admin.
d. Click Login.
e. Click Download.
f. Click Save.
3. Install the Christie presenter.
a. Double-click Christie Presenter.
b. Click OK.
c. Click Next.
H Series Service Manual
020-000802-03 Rev. 1 (12-2016)
(SYSx)
.
RJ45 to HDBaseT port
Power
RS232 to PC
HDMI input
Service setup
26