Christie H Series User Manual
Hide thumbs
Also See for H Series:
- Service manual (92 pages) ,
- User manual (13 pages) ,
- Quick start manual (2 pages)
Related Manuals for Christie H Series
Summary of Contents for Christie H Series
- Page 1 User Guide 020-102080-05 H Series, HS Series, GS Series, and Inspire Series Auto Warp...
- Page 2 Christie's control such as maintenance of the product in proper working conditions. Performance specifications are based on information available at the time of printing. Christie makes no warranty of any kind with regard to this material, including, but not limited to, implied warranties of fitness for a particular purpose.
-
Page 3: Table Of Contents
Calibrating the image..........14 H Series, HS Series, GS Series, and Inspire Series User Guide–Auto Warp 020-102080-05 Rev. -
Page 4: Auto Warp Application Installation
DWU960-iS • DWU960ST-iS • 4K480-iS H Series, HS Series, GS Series, and Inspire Series User Guide–Auto Warp 020-102080-05 Rev. 1 (01-2024) Copyright © 2024 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use. -
Page 5: Auto Warp System Layout
1 to 6 1 to 3 1 to 3 1 to 2 1 to 2 H Series, HS Series, GS Series, and Inspire Series User Guide–Auto Warp 020-102080-05 Rev. 1 (01-2024) Copyright © 2024 Christie Digital Systems USA, Inc. All rights reserved. -
Page 6: Installing The Webcam Driver
2. In the Edge Blending Settings dialog, adjust the Gamma slider to the brightness required. The brightness can be adjusted from 0 to 10. H Series, HS Series, GS Series, and Inspire Series User Guide–Auto Warp 020-102080-05 Rev. 1 (01-2024) Copyright ©... - Page 7 Auto Warp application installation 3. To close the dialog, in the right-hand corner of the dialog, select X. H Series, HS Series, GS Series, and Inspire Series User Guide–Auto Warp 020-102080-05 Rev. 1 (01-2024) Copyright © 2024 Christie Digital Systems USA, Inc. All rights reserved.
-
Page 8: Stacking Solution
5. To move the image, use the T+/- or P+/- controls . 6. To focus the image, adjust the Focus slider. Christie recommends the default (minimum value) for focus. 7. Select Advance. H Series, HS Series, GS Series, and Inspire Series User Guide–Auto Warp 020-102080-05 Rev. 1 (01-2024) Copyright ©... -
Page 9: Setting The Boundaries Of The Projected Image
If the image is still not as expected, repeat step 3 to retry recalibrating the image again. To save time, recalibrate the image with photos stored on the computer. H Series, HS Series, GS Series, and Inspire Series User Guide–Auto Warp 020-102080-05 Rev. 1 (01-2024) Copyright ©... -
Page 10: Auto Blending Solution
4. To increase or decrease the magnification of the image so it fits within the image box, adjust the Zoom slider. 5. To move the image, use the T+/- or P+/- controls . H Series, HS Series, GS Series, and Inspire Series User Guide–Auto Warp 020-102080-05 Rev. 1 (01-2024) Copyright ©... -
Page 11: Setting The Boundaries Of The Projected Image
Auto correction starts. e) If the image is as expected, return to the Boundary page (on page 9) to compare the image. H Series, HS Series, GS Series, and Inspire Series User Guide–Auto Warp 020-102080-05 Rev. 1 (01-2024) Copyright ©... - Page 12 If the image is still not as expected, repeat step 3 to retry recalibrating the image again. To save time, recalibrate the image with photos stored on the computer. H Series, HS Series, GS Series, and Inspire Series User Guide–Auto Warp 020-102080-05 Rev. 1 (01-2024) Copyright ©...
-
Page 13: Auto Blending And Stacking Solution
10. When the overlap area is correct, select OK. H Series, HS Series, GS Series, and Inspire Series User Guide–Auto Warp 020-102080-05 Rev. 1 (01-2024) Copyright ©... -
Page 14: Setting Up The Camera
Calibrate the image so it clearly fills the defined area. 1. To open the calibration page, from the Auto Warp homepage, select Calibration. H Series, HS Series, GS Series, and Inspire Series User Guide–Auto Warp 020-102080-05 Rev. 1 (01-2024) Copyright ©... - Page 15 If the image is still not as expected, repeat step 3 to retry recalibrating the image again. To save time, recalibrate the image with photos stored on the computer. H Series, HS Series, GS Series, and Inspire Series User Guide–Auto Warp 020-102080-05 Rev. 1 (01-2024) Copyright ©...