Page 1
User Manual 020-001466-01 HS Series D16WU-HS/D16HD-HS D20WU-HS/D20HD-HS...
Page 2
The warranty does not apply to any product where the serial number has been removed or obliterated. The warranty also does not apply to any product sold by a reseller to an end user outside of the country where the reseller is located unless (i) Christie has an office in the country where the end user is located or (ii) the required international warranty fee has been paid.
Introduction This manual is intended for Christie qualified installers and trained operators of HS Series D16-20 projection systems. For complete HS Series D16-20 product documentation and technical support, go to www.christiedigital.com. Safety and warning guidelines Read all safety and warning guidelines before installing or operating the projector. This projector must be operated in an environment that meets the operating range specification.
Caution! If not avoided, the following could result in minor or moderate injury. • ELECTRICAL and BURN HAZARD! Use caution when accessing internal components. • Only Christie qualified technicians are authorized to use the tools provided in the toolbox. Laser safety precautions This projector has been classified as Class 1 Laser Product-Risk Group 3 according to the IEC 62471:2006, IEC 60825-1:2014 and IEC 62471-5:2015 standard.
Page 11
• Temporary show installations containing Risk Group 3 laser-illuminated projectors may be installed by Christie or sold or leased only to valid laser light show variance holders (laser light show manufacturers) for image projection applications. Such manufacturers may currently hold a valid variance for production of Class IIIb and IV laser light shows and/or for incorporation of the Risk Group 3 laser-illuminated projectors into their shows.
Learn about the labels that may be used on the product. Labels on your product may be yellow or black and white. General hazards Hazard warnings also apply to accessories once they are installed in a Christie product that is connected to power. Fire and Shock Hazard To prevent fire or shock hazards, do not expose this product to rain or moisture.
Contact your dealer Record the information about your projector and keep this information with your records to assist with the servicing of your projector. If you encounter a problem with your Christie projector, contact your dealer. Purchase record...
A web page using Ethernet, or from a PC or device using a wireless USB dongle (optional) How the projector works The HS series D16-20 projector accepts a variety of input signals for a wide range of commercial projection applications.
Introduction Product documentation For installation, setup, and user information, see the product documentation available on the Christie Digital Systems USA Inc. website. Read all instructions before using or servicing this product. 1. Access the documentation from the Christie website: •...
Christie recommends a 20 A rated wall breaker for the installation. To ensure safety operation, only use the AC power cord provided with the product or recommended by Christie.
2. Ensure the lens has been installed in the projector by a Christie qualified service technician. Warning! Failure to comply with the following could result in death or serious injury. • Installing or replacing a lens must be done by a Christie qualified service technician to avoid exposure to dangerous emission levels.
Adjusting the size and position Adjust the projector’s size and position. Christie recommends warming the lens before completing these procedures as focus may change as the lens warms. Setting the image size preset Set the image size preset to display the image in its native resolution or to resize by maximizing the height, width, both height and width, or to the maximum size while keeping the original aspect ratio.
Saving geometry correction Save the geometry correction setting, including Keystone, Pincushion, 4-Corner adjustment, and Christie Twist setting. One projector can save maximum up to five geometry settings, with Record 1 being reserved for Christie Twist. 1. Select Menu > Size & Position > Geometry Correction > Warp Memory > Save Warp.
Uploading warp settings from Christie Twist erases the currently applied keystone setting. 1. Select Menu > Size & Position > Geometry Correction > Keystone > Vert Keystone.
Adjusting 4-corner Use 4-corner to correct the four corners of the projector's display image. Uploading warp settings from Christie Twist erases the currently applied 4-corner setting. 1. Select Menu > Size & Position > Geometry Correction > 4-Corner. 2. Select the corner and the direction to adjust.
Blending multiple images Use Christie Twist to configure edge blends and apply them to the projectors. Christie Twist Premium and Twist Pro offer advanced blending options. Refer to the Christie website (www.christiedigital.com) for product information and documentation. 1. Connect the projector and computer to the same network and subnet.
HDMI 2.0 plays 4K video without compromise, at 50 and 60 frames per second. In HDMI 1.4, the rate of 4K is limited to 30 frames per second. HS series D16-20 projector is compatible with both HDMI 1.4 and HDMI 2.0. When the projector is connected to a hardware device supporting HDMI 1.4 only, disable the EDID for HDMI 2.0 to play the videos properly.
Diagnostic tools Follow these procedures to help diagnose issues with HS series D16-20 projectors. Viewing projector information View the status of the projector, source information, light source information, and communication information. The information is read-only. 1. To view the status of the projector, such as model name, serial number, and so on, select Menu >...
Signal connectivity specifications Identify the signal connectivity specifications for HS Series D16-20 projector. Inputs The list of formats listed below are not exhaustive and other formats may be supported. For more information, contact Christie Technical Support. Signal Resolution Frame HDMI1...
Page 71
Corporate of ces Worldwide of ces Christie Digital Systems USA, Inc. Australia Germany Republic of South Africa United Kingdom Cypress ph: +61 (0) 7 3624 4888 ph: +49 2161 664540 ph: +27 (0)11 510 0094 ph: +44 (0) 118 977 8000...