Service Setups; Required Equipment For Testing; Service Modes; Entering Factory Mode - Christie HS Series Service Manual
Hide thumbs
Also See for HS Series:
- User manual (73 pages) ,
- Product safety manual (57 pages) ,
- Installation and setup manual (45 pages)
Table of Contents
Advertisement
Service setups
Understand the special software adjustments and related details that may require the attention of a
qualified service technician, whether done periodically or after a specific module replacement.
Required equipment for testing
The equipment required for testing after service is listed below.
•
PC or laptop with WUXGA/1080p resolution
•
DVD player with Multi-system, equipped Component, S Video, Composite, and HDMI.
•
HDTV Source (480P, 720P, 1080P)
•
Quantum Data 802B or CHROMA2327 (Color Video Signal and Pattern Generator)
•
Chroma meter (CL200)
•
HD BaseT extender (CH-506TX)
•
Voltage test meter
•
VGA cable, power cord, component cable, audio cable, HDMI cable, RJ45 cable, and RS232
cable
•
Phillips #1 screwdriver
•
Flathead 3/16" X 4" screwdriver
•
M4 Allen key
•
M2 socket driver
•
M4 socket driver
Service modes
D13HD-HS and D13WU-HS contain two kinds of modes: Factory and Service.
Entering Factory mode
Learn how to enter the Factory mode.
1. Turn on the projector.
2. On the remote or keypad, press the Auto, left, left, left buttons sequentially.
HS Series D13 Service Manual
020-000892-03 Rev. 1 (12-2019)
19
Hide quick links:
Advertisement
Table of Contents
