Parts; Using The Illustrated Parts Lists - Nordson Mesa Fulfill Customer Product Manual

32 
Fulfill Retrofit for Mesat Melters

Parts

Using the Illustrated Parts Lists

The number in the Item column corresponds to the circled item number in the
parts list illustration. A dash in this column indicates that the item is an
assembly.
The number in the Part column is the Nordson part number you can
use to order the part. A series of dashes indicates that the part is
not saleable. In this case, you must order either the assembly in
which the part is used or a service kit that includes the part.
Item Part
— 0000000
1 000000
2 - - - - - -
3 0000000
NS 000000
NOTE A: Important information about item 1
AR: As Required
NS: Not Shown
Part 1121938_02
This section provides information about parts that are associated with the fill
system. Refer to the melter manual for information about all other melter
components.
To order parts, call the Nordson Customer Service Center or your local
Nordson representative. Use these five-column parts lists, and the
accompanying illustrations, to describe and locate parts correctly. The
following chart provides guidance for reading the parts lists.
The Description column describes the part and sometimes
includes dimensions or specifications.
The Note column contains letters that refer to notes at the
bottom of the parts list. These notes provide important
information about the part.
The Quantity column tells you how many of the part is
used to manufacture the assembly shown in the parts
list illustration. A dash or AR in this column indicates
that the amount of the item required in the assembly is
not quantifiable.
Description
Assembly A
S Part of assembly A
S S Part of item 1
S S S Part of item 2
S S S S Part of item 3
Quantity Note
—
2 A
1
AR
2
E 2013 Nordson Corporation