Table 21: Example Dip Switch Setting - WAGO -I/O-SYSTEM 750 Manual

54 Device Description
Example:
The following example of a DIP switch setting illustrates the structure of the
respective device name.
Slide switch Nos. 1, 2, 4, 7 and 8 are moved to the ON position.

Table 21: Example DIP switch setting

Slide
switch
No. 8
No. 7
No. 1
No. 2
No. 3
No. 4
No. 5
No. 6
The device name "wagox750x375x11" results from the example DIP switch
setting.
Assigning the address via DCP!
The station is normally named as part of the configuration by assigning the device
name via DCP.
More information is available in the chapter "Fieldbus Communication" >>... >>
"DCP".
Pos : 40 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Position Description
ON The device uses the instances specified via slide switch No. 1 - 7.
ON The device uses character string "wagox750x375".
ON The "x" separator is added (slide switch No. 7 ON).
ON Based on the following rule:
OFF
ON
OFF
OFF
The decimal value of the device name instance results:
Instance = 1*2
= 1 + 2 + 0 + 8 + 0 + 0
= 11
750-375 PROFINET IO advanced Fieldbus Coupler
6
Instance = ∑ Switch position (n) * 2
n=1
0 1 2 3
+ 1*2 + 0*2 +1*2 + 0*2
WAGO-I/O-SYSTEM 750
(n-1)
4 5
+ 0*2
Version 1.1.0
Manual