Manufacturing Number; Hardware Address (Mac Id); Figure 2: Labeling On The Side Of A Component (Example); Figure 3: Example Of A Manufacturing Number - WAGO -I/O-SYSTEM 750 Manual

Profinet io advanced fieldbus coupler, 2-port switch, 100 mbit/s, digital, analog and complex signals
Hide thumbs Also See for WAGO-I/O-SYSTEM 750:
Table of Contents

Advertisement

20
System Description
Pos : 19.6 /Serie 750 (WAGO-I/O-SYST EM)/Systembesc hrei bung/Ger ät und Sys tem/Fertig ungs nummer @ 3\mod_1225444612218_21.doc x @ 24889 @ 2 @ 1
3.1

Manufacturing Number

The serial number indicates the delivery status directly after production. This
number is part of the labeling on the side of each component.
In addition, the serial number is printed on the cover cap of the configuration and
programming interface of the fieldbus coupler/controller, so that it can also be
read when installed.

Figure 2: Labeling on the side of a component (example)

01
Calendar
week

Figure 3: Example of a manufacturing number

The manufacturing number consists of the production week and year, the software
version (if available), the hardware version of the component, the firmware loader
(if available) and further internal information for WAGO Kontakttechnik GmbH
& Co. KG.
Pos : 19.7 /Serie 750 (WAGO-I/O-SYST EM)/Systembesc hrei bung/Ger ät und Sys tem/Har dwar e-Adress e (M AC-ID) @ 7\mod_1270708464299_21.doc x @ 54960 @ 2 @ 1
3.2

Hardware Address (MAC ID)

Each PROFINET IO advanced Fieldbus Coupler has an internationally
unambiguous physical address, referred to as the MAC-ID (Media Access Control
Identity).
As part of the labeling on the right side of this component, the MAC ID is printed
in the block diagram of the fieldbus coupler/controller.
In addition, the MAC ID is located on a self-adhesive tear-off label on the left side
of the fieldbus coupler/controller.
The MAC ID has a fixed length of 6 bytes (48 bits) which are presented
hexadecimal. The first three bytes identify the manufacturer (e.g. 00:30 DE for
WAGO). The second 3 bytes comprise the unique serial number of the hardware.
Manufacturing number
03
01
02
Year Software
Hardware
version
version
750-375 PROFINET IO advanced Fieldbus Coupler
03
- B060606
Firmware
Internal
loader
number
version
WAGO-I/O-SYSTEM 750
Manual
Version 1.1.0

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

750-375750-377Wago-i/o-system 750 series

Table of Contents