Activation Of The Station-Wide Profienergy Functionality; Parameterization Of The I/O-Modules; Table 47: Parameterization Dap - Attribute Minimal Pause Time (Profienergy) - WAGO -I/O-SYSTEM 750 Manual

102 Commissioning
Inactivity is terminated after any hardware or software reset of the fieldbus
coupler.
8.6.1.8

Activation of the station-wide PROFIenergy Functionality

This setting is only available with DAP for PROFIenergy (with the "PE-DAP"
ending).
Table 47: Parameterization DAP – Attribute Minimal pause time (PROFIenergy)
Attribute Name
Minimal pause time
8.6.2

Parameterization of the I/O-Modules

The configurable attributes for the various I/O module types are listed in the
appendix.
More information on the I/O module parameters!
The individual attribute values and descriptions are available in the appendix in
the respective subchapters under the chapter "Parameters for the I/O Modules".
Pos : 65.4.1 /Serie 750 (WAGO-I/O-SYST EM)/In Betrieb nehmen/F el dbus knoten i n Betrieb nehmen/PROF IBU S/Ver bindungs aufbau - 2 IOARs und 1 IOSAR ( 750-375) @ 14\mod_1362577278370_21.doc x @ 113800 @ 2 @ 1
750-375 PROFINET IO advanced Fieldbus Coupler
Attribute Value Description
10 sec
1 min
10 min
Pauses requested by the PROFIenergy profile are
1 h only introduced during pause times greater than or
equal to the setting made.
10 h
1 d
infinity
WAGO-I/O-SYSTEM 750
Manual
Version 1.1.0