Ethernet; Figure 51: Wbm Page"Ethernet; Table 51: Description Of The Parameters Of The Wbm Page "Ethernet - WAGO -I/O-SYSTEM 750 Manual

110 Web-based Management (WBM)
9.3

Ethernet

The WBM page "Ethernet" contains information about the physical connection to
the ETHERNET network and packet statistics for both ETHERNET ports of the
fieldbus coupler. The area for packet statistics is automatically refreshed at
3-second intervals. The page has to be reloaded to refresh any other data.

Figure 51: WBM page"Ethernet"

Table 51: Description of the parameters of the WBM page "Ethernet"

Ethernet Interface
MAC Address
Port Details
MAC Address
Link State
Link Speed
Link Mode
Autonegotiation
Auto MDIX
Port Statistics
Dropped RX Packets
Bad RX Packets
RX Packets
Dropped TX Packets
Bad TX Packets
TX Packets
750-375 PROFINET IO advanced Fieldbus Coupler
Displays the MAC address, which helps identify and address the
fieldbus coupler.
Port 1
Displays the port MAC address.
Displays the current link status (up/down) of the port.
Displays the current transmission rate of the port (10 Mbit/s or
100 Mbit/s), (full-duplex / half-duplex).
Displays the current ETHERNET transfer mode of the network.
Displays if the Autonegotiation function is enabled for this port.
Displays if the Auto MDIX function is enabled for this port.
Port 1
Displays the number of dropped receive packets.
Displays the number of bad receive packets.
Displays the total number of receive packets.
Displays the number of dropped transmit packets.
Displays the number of bad transmit packets.
Displays the total number of transmit packets.
WAGO-I/O-SYSTEM 750
Port 2
Port 2
Manual
Version 1.1.0