WAGO -I/O-SYSTEM 750 Manual page 14

14 Notes about this Documentation
Table 4: Abbreviations and terms used in this manual
Abbreviation/
Term
IOS
IOX
iPar
IPv4
K-Bus
LED
LLDP
MCR
MIB
Module,
module type
NIL
PE
PNIO
RDCR
RTA Alarm
SEDI
SNMP V1/V2
Submodule,
submodule type
TCI
TCP
WBM
Pos : 15 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
750-375 PROFINET IO advanced Fieldbus Coupler
Explanation Description
IO Supervisor Programming device in the PROFINET IO network.
IO station Station in the PROFINET IO network, "X" stands for
"Device", "Controller" or "Supervisor".
iParameter Individual parameterization of safety-related parameters for
fail-safe PROFIsafe V2 I/O modules.
The standardized Individual Parameter Server (iPar Server)
automatically restores the parameterization when replacing
components.
Internet Protocol IPv4 describes the 4th version of IP protocol which is used in
Version 4 internet to route network packets to its destination. Version 4
was specified in RFC 791 in 1981.
Internal bus Internal communication system (local bus) of series 750/753.
Light Emitting Indicator light signaling device states.
Diode
Link Layer According to IEC, standardized Layer 2 protocol that
Discovery provides the basis for PROFINET topology detection.
Protocol
Multicast CR Multicast Communication Relationship, exchange of
productive data with no intervention of an IO controller or IO
supervisor.
Management Database of certain protocols, e.g. LLDP that can be read via
Information Base SNMP.
Module, module Respective data set in the configuration tool for various I/O
type modules, types.
Not In List The entry is not in the list.
PROFIenergy Energy management profile based on the communication
mechanisms of PROFINET IO.
PROFINET IO Abbreviation for PROFINET IO.
Record Data CR Acyclic reading and writing of data sets.
"Real-Time Acyclic real-time alarm transfer between IO controller and IO
Protocol Acyclic" device.
Alarm
WAGO-Safety- WAGO tooling for individual parameterization of
Editor 75x PROFIsafe V2 I/O modules.
Simple Network Standard protocol according to IEC used for the management
Management of ETHERNET devices in version 1 and 2.
Protocol
Version 1/
Version 2
Submodule, Respective selectable data set in the configuration tool for
submodule type various process data assignment options of the I/O modules,
types.
Tool Calling Open interface for integrating device tools in engineering
Interface systems.
Transmission Protocol for data transmission.
Control Protocol
Web-based HTTP-based management unit for configuration and
Management information purposes for ETHERNET devices.
WAGO-I/O-SYSTEM 750
Manual
Version 1.1.0