Signal Lines; Wago Shield Connecting System; Figure 19: Example Of The Wago Shield Connecting System; Figure 20: Application Of The Wago Shield Connecting System - WAGO -I/O-SYSTEM 750 Manual

40 System Description
3.8.3

Signal lines

I/O modules for analog signals and some interface I/O modules are equipped with
shield clamps.
Use shielded signal lines!
Only use shielded signal lines for analog signals and I/O modules which are
equipped with shield clamps. Only then can you ensure that the accuracy and
interference immunity specified for the respective I/O module can be achieved
even in the presence of interference acting on the signal cable.
3.8.4

WAGO Shield Connecting System

The WAGO shield connecting system consists of shield clamping saddles,
busbars and various mounting carriers. These components can be used to achieve
many different configurations.

Figure 19: Example of the WAGO shield connecting system

Figure 20: Application of the WAGO shield connecting system

Pos : 19.14 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Pos : 20 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
750-375 PROFINET IO advanced Fieldbus Coupler
WAGO-I/O-SYSTEM 750
Manual
Version 1.1.0