Table 160: Parameterization Ai, Tc - Attribute "Check Lower Measurement Range Limit; Table 161: Parameterization Ai, Tc - Attribute "Cold Junction Compensation; Table 162: Parameterization Ai, 3 Pm - Attribute "Watchdog; Table 163: Parameterization Ai, 3 Pm - Attribute "Nom. Frequency Power Supply - WAGO -I/O-SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-375 PROFINET IO advanced Fieldbus Coupler
Table 160: Parameterization AI, TC – Attribute "Check lower measurement range limit"
Attribute Name
Check lower
measurement range
limit
Table 161: Parameterization AI, TC – Attribute "Cold junction compensation"
Attribute Name
Cold junction
compensation
Table 162: Parameterization AI, 3 PM – Attribute "Watchdog"
Attribute Name
Watchdog
Table 163: Parameterization AI, 3 PM – Attribute "Nom. frequency power supply"
Attribute Name
Nom. frequency power
supply
Table 164: Parameterization AI, 3 PM 495 – Attribute "Identifier Rogowski coils"
Attribute Name
Identifier Rogowski
coils
Table 165: Parameterization AI, 3 PM – Attribute "Peak value phase"
Attribute Name
Peak value phase
Table 166: Parameterization AI, 3 PM – Attribute "Autoreset min./max. value"
Attribute Name
Autoreset min./max.
value
Manual
Version 1.1.0
Attribute Value Description
If the lower limit of the respective measuring range
is reached, a corresponding diagnostic alarm is
enabled
transmitted and an entry is made in the diagnostics
database of the station proxy.
If the lower limit of the respective measuring range
is reached, no corresponding diagnostic alarm is
disabled
transmitted and no entry is made in the diagnostics
database of the station proxy.
Attribute Value Description
The cold junction compensation of the respective
enabled
signal channel is activated.
The cold junction compensation of the respective
disabled
signal channel is deactivated.
Attribute Value Description
disabled
See manual for I/O module 75x-494, 75x-495
www.wago.com
enabled
Attribute Value Description
50 Hz
See manual for I/O module 75x-494, 75x-495
www.wago.com
60 Hz
Attribute Value Description
RT500
See manual for I/O module 75x-495
www.wago.com
RT2000
Attribute Value Description
L1
See manual for I/O module 75x-494, 75x-495
L2
www.wago.com
L3
Attribute Value Description
disabled
See manual for I/O module 75x-494, 75x-495
unter: www.wago.com
enabled
Appendix 185